The Mobility 40G antenna is the four-chain cellular workhorse of Peplink’s Mobility range: 4×4 MIMO for 5G and LTE plus a high-gain LNA GPS receiver, in one IP68 dome. No Wi-Fi elements — every lead goes to cellular or GPS, which is exactly what you want when the router is doing the heavy lifting and your access points live elsewhere.

When the Mobility 40G antenna is the right choice
Choose it when your router has a 4×4 MIMO modem, or two 2×2 modems, and you want every chain terminated. A 4×4 modem fed by a two-element antenna runs at half its potential — the two unused chains simply sit idle. Four elements in one dome fix that without adding a second mount or a second hole in the roof.
If you also want Wi-Fi radiating from the roof, the Mobility 42G adds two Wi-Fi chains to the same four cellular elements. If your router only has a single 2×2 modem, the Mobility 20G or the Wi-Fi-equipped Mobility 22G will serve you for less.
Choosing your Mobility 40G antenna configuration
- Connector — the 40G is the only Mobility antenna offered in three connector types: SMA male, QMA male, and N-Type. Most Peplink desktop and mobile routers take SMA; several embedded and MBX-class units use QMA; N-Type is the choice for marine and long-run installs where a more robust, weather-tolerant connection matters.
- Cable length — 1 ft / 0.3 m when the router sits directly beneath the dome, 6.5 ft / 2 m for a normal cabin or cabinet run. Use the shortest run that reaches; coax loss is signal you never get back.
- Colour — black or white, to match a vehicle roof or a white fibreglass deck.
Specifications
Every Mobility 40G antenna variant shares the same RF core — only connector, cable length and colour change:
- 4×4 MIMO 5G-ready cellular antenna system with GPS
- 4× LTE/5G, 1× GPS with high-gain LNA
- Frequency range: 600–6000 MHz
- IP68 rating
- Cellular and GPS connector: SMA male, QMA male or N-Type
- Colour: black or white
- Cable lengths: 1 ft / 0.3 m · 6.5 ft / 2 m
Full specifications are on the official Peplink Mobility antenna series page.
What to pair it with
Any 4×4 MIMO Peplink router — the MAX BR1 Pro 5G is the common pairing, and dual-modem units such as the BR2 series terminate all four chains too. The full range sits in our antenna catalogue.
Not sure how many cellular chains your router actually uses, or whether N-Type is worth it for your install? Ask our engineers — both are quick answers and they decide which Mobility antenna you order.


Reviews
There are no reviews yet.