23
Jun
Jun
NEW PRODUCT
BALANCE SERIES
5G · WI-FI 7 · POE+
The new Peplink Balance 310 5G answers a problem every branch network has: complexity. In fact, a typical site stacks a router, a switch, a separate cellular gateway, a Wi-Fi access point, and a PoE injector or two — each from a different vendor, and each another thing to power, mount, manage, and replace. As a result, this single box can replace that whole stack.
Instead of a shelf of separate gear, the Peplink Balance 310 5G consolidates an entire enterprise branch network into one rugged, fanless chassis. Moreover, it adds built-in 5G failover, so the site stays online even when the primary link drops.
8×
Power your whole branch from one box
For instance, eight 2.5G PoE+ ports drive IP cameras, access points, VoIP phones, and kiosks directly. In addition, a 240W total power budget means no separate switch or power supplies are required.
What Makes the Peplink Balance 310 5G Different
All-in-One Branch Platform
- First, routing, switching, Wi-Fi 7, cellular, and edge compute live in one fanless box
- Also, they deliver 4 Gbps of throughput for 50–500 users
- As a result, you get fewer vendors, faster deployments, and less rack clutter
Built-In 5G Failover
- First, an embedded 5G modem (NSA & SA, Sub-6 GHz) adds redundant SIM slots
- It is also US carrier certified: AT&T, T-Mobile, Verizon, and FirstNet
- Meanwhile, Hot Failover keeps sessions alive when a link drops
Resilient Multi-WAN
- Next, a 1× 10G Multi-Gig Ethernet port pairs with a 1× 10G SFP+ port (WAN or LAN)
- In addition, 2× USB-C ports add tethering or wired backup
- Finally, SpeedFusion bonds, fails over, and smooths traffic across links
Wi-Fi 7 — AP or WAN
- Similarly, Wi-Fi 7 runs 2×2 MIMO across both bands (2.4 / 5 GHz)
- So you can use it as an access point or as a Wi-Fi WAN uplink
- Therefore, smaller sites need no separate AP hardware
Edge Compute
- Additionally, native Docker support comes with 8GB of internal storage
- As a result, monitoring, security, and automation can run on the router
- Consequently, you rely less on on-site PCs or servers
Industrial-Grade Design
- Above all, a fanless design handles -40°F to 149°F (-40°C to 65°C)
- It also offers dual power inputs and built-in GPS
- For that reason, FIPS 140-3 validation suits security-sensitive sites
Who the Balance 310 5G Is For
IT Managers & MSPs
First, it consolidates the branch. Because every location runs the same standardized platform, sparing gets simpler and rollouts get faster. In addition, multi-WAN and built-in 5G failover deliver the SLA-grade uptime users expect — all managed centrally through InControl2.Government & Public Safety
Above all, it delivers compliance-ready resilience. Because of FIPS 140-3 validation, FirstNet certification, and ruggedized fanless hardware, it fits security-sensitive deployments. Furthermore, redundant WAN paths and dual power keep operations always-on.Fleet & Industrial
In addition, it is built for harsh sites. Since it offers a wide temperature range, built-in GPS, dual DC inputs, and a 12–54V terminal block, the same hardware deploys in vehicles, remote enclosures, and industrial settings.Peplink Balance 310 5G Specifications
| Product Code | BPL-310-5GK-T-PRM |
| Router Throughput | 4 Gbps |
| Recommended Users | 50 – 500 |
| WAN Interfaces | 1× 10G Multi-Gig Ethernet; 1× 10G SFP+ (WAN/LAN configurable); 2× USB-C; embedded 5G modem with redundant SIM slots |
| LAN Interfaces | 8× 2.5G Multi-Gig Ethernet with 802.3at PoE+ |
| Wi-Fi | Wi-Fi 7, 2×2 MIMO, dual-band (2.4 / 5 GHz), AP and/or Wi-Fi WAN |
| Cellular | 5G NSA & SA Sub-6 GHz; up to 4.1 Gbps down / 900 Mbps up (theoretical) |
| Carrier Certifications | AT&T, T-Mobile, Verizon, FirstNet |
| Edge Compute | Docker, 8GB internal storage (USB external storage) |
| PoE Budget | 240W total; up to 8× 802.3at PoE+ |
| Power Input | 2× Power DIN 54V DC; AC adapter (100–240V AC); terminal block 12–54V DC |
| Operating Temp | -40°F to 149°F (-40°C to 65°C) |
| Dimensions / Weight | 7.3 × 8.07 × 1.61 in / 3.41 lb (1.55 kg) |
| Certifications | FCC, CE, RoHS; FIPS 140-3 validated |
| Warranty | 1-Year Limited (PrimeCare recommended) |
In short, the Balance 310 5G ships with a 54V DC power supply, four LTE/5G antennas, two Wi-Fi antennas, a GPS active antenna, and a rack-mount ear kit. Of course, the full list lives on the product page.
Bring the Whole Branch Into One Box
Overall, the new Peplink Balance 310 5G brings routing, switching, Wi-Fi 7, 5G, and edge compute into one chassis. Ultimately, built-in failover keeps every site online. View the Balance 310 5GOr contact our team to spec the right configuration for your deployment.
