5G Adapter

Overview

The Peplink ADP-5GY-T-PRM is a dedicated 5G cellular adapter built for vehicle, fleet, and infrastructure deployments. It connects via a 2.5G LAN port and draws power from any 802.3at PoE-capable port on your Peplink router or switch — no USB port and no separate power supply required.

With an embedded North America 5G modem certified for AT&T, T-Mobile, and FirstNet, this adapter adds a fully managed 5G WAN to your existing Peplink router. GPIO, ignition sensing, and integrated GPS make it a natural fit for in-vehicle and mobile command deployments.

Key Features

• 1x Embedded 5G Modem — North America, sub-6GHz
• 1x 2.5G LAN Port — Ethernet WAN interface, powered via 802.3at PoE
• GPIO — External device integration and sensor input support
• Ignition Sensing — Auto power on/off with vehicle ignition
• Integrated GPS — Real-time location for fleet tracking via InControl2
• Carrier Certified — AT&T, T-Mobile, and FirstNet (Band 14)
• InControl2 Compatible — Centrally managed alongside your Peplink stack

Use Cases

Fleet & Vehicle Deployments

Ignition sensing and GPIO support make the ADP-5GY-T-PRM a clean fit for transit vehicles, emergency response, and fleet trucks. The unit powers on with the ignition, GPS reports location back to InControl2, and GPIO pins integrate with onboard systems — all over a FirstNet and T-Mobile certified 5G connection.

Public Safety & Government

FirstNet certification on Band 14 gives law enforcement, EMS, and emergency management teams priority access on AT&T’s dedicated public safety network. Pair with a Peplink router running SpeedFusion to bond this 5G WAN with a secondary link for mission-critical uptime.

IT Managers & MSPs — WAN Expansion

Add a 5G WAN to any compatible Peplink Balance or MAX router by plugging the ADP-5GY-T-PRM into an open PoE LAN port. No USB port needed, no extra power brick, no new hardware footprint. Managed centrally through InControl2 alongside your existing deployment.

Fixed & Infrastructure Sites

Mount the adapter for optimal signal, run a single PoE cable back to the router, and manage everything remotely through InControl2. The 2.5G LAN interface supports high-throughput 5G without the bottleneck of a standard gigabit port.

Technical Specifications